Panasonic AJ-HD1700PE Clearing, Resetting all the items and values, Selecting the menu item

Function menus

50P IN/OUT ASSIGN

<50P IN/OUT ASSIGN>

Registering functions in the input pins/Active inputs Registering functions in the output pins/Active outputs

1.Selecting the 50-pin connector pins

Turn the ADJ dial to move the selection marker and select the pin of the 50-pin connector into which the menu item is to be registered.

2.Entering the 50-pin connector pins Press the ADJ dial.

The entered 50-pin connector pin display is highlighted.

3.Selecting the menu item

Turn the ADJ dial and select the menu item for the pin of the 50-pin connector which was selected in step 1 above.

4.Entering the menu item Press the ADJ dial.

The on-screen setting display now blinks.

5.Selecting the setting

Turn the ADJ dial and select the setting for the menu item which was selected in step 3 above.

6.Entering the setting

Press the ADJ dial .

What is to be operated by the ADJ dial returns to the front panel. Whatever was selected in step 3 is displayed as the registered item name and whatever was selected in step 5 is displayed as the registered value.

7.To select menu items and settings for other 50-pin connector pins, repeat steps 1 to 6.

8.Saving the data in the 50-pin registration file

To save what has been set in the 50-pin connector in

the 50-pin registration file, press			(SET).		F5
If		(EXIT) is pressed	without the	above settings
	F6
have been saved, those settings will be canceled.

Clearing

1.Turn the ADJ dial to move the selection marker and select the pin of the 50-pin connector whose menu item is to be cleared.

2.Press F4(RESET). The registered item name and registered value displays now go blank.

3.To clear the menu items in other 50-pin connector pins, repeat steps 1 and 2.

4.To save what has been set in the 50-pin connector in

the 50-pin registration file, press (SET). F5

If F6 (EXIT) is pressed without the above settings have been saved, those settings will be canceled.

Resetting all the items and values

Press	F4	(RESET) while holding down the		button.		F
All the registered item names and registered values
are now set to the factory settings. (These settings
cannot be restored.)
Special IN menu list
No.
SUPER			Description of setting
DISPLAY
Functions not featured on the setup menua
B00			For transferring to the STANDBY ON mode.
STBY ON
B01			For transferring to the STANDBY OFF mode.
STBY OFF
B02			For alternately transferring to the STANDBY ON
STBY ONOFF			and OFF mode.
B03			For transferring to the EJECT mode.
EJECT
B04			For prerolling the tape to the IN point when the
CUE			IN point has been registered; for prerolling the
			tape to the current point when the IN point has
			not been registered.
B05			For registering the edit IN point.
IN SET
B06			For transferring to the still picture (STILL) mode.
STILL
B07			The 9-pin connector functions.
422 REM ON
B08			The 9-pin connector does not function.
422 REM OFF
B09			For returning TC SOURCE to the previous EXT
TC EXT			mode.
			(No switching occurs if	the EXT mode	is
			currently established	.)
B10			For switching TC SOURCE to INT and TCG
TC INT AUTO			MODE to AUTO.
B11			For switching TC SOURCE to EXT_L and TCG
TC EXT_L			MODE to REGEN.
REG
SRC PROTECT and STOP PROTECT settings switched simultaneously
B20			For switching the tape protection mode operation to
PROTECT			half-loading in the event that the VTR has been left
HALF			standing in the STOP mode or the STILL mode while
			any of the search modes (JOG, VAR or SHTL) was
			established.
B21			For switching the tape protection mode operation to
PROTECT			tension release when the VTR has been left standing
T-REL			in the STOP mode or the STILL mode while any of the
			search modes (JOG, VAR or SHTL) was established.

73