Panasonic AJ-HD1700PE Displaying the hour-meter information, Turn the ADJ dial to move the cursor

Error messages

∫Displaying the hour-meter information

Turn the ADJ dial to move the cursor (	¢), and the
description for the item where the cursor is located is
shown as a superimposed display.

No./Item	Description
H00	Displays in 1-hour increments the time during
	which power has been supplied.
OPERATION
H01	Displays in 1-hour increments the amount of
	time during which the drum has rotated.
DRUM RUN
H02	Displays in 1-hour increments the amount of time during
	which the tape has been running in the FF, REW, PLAY,
TAPE RUN	SEARCH (JOG, VAR and SHTL), REC and EDIT modes (but
	not in the JOG, VAR, SHTL or STILL mode).
H03	Displays in 1-time increments the number of
	times the tape has been threaded (loaded) and
THREADING	unthreaded (unloaded).
H04	Displays in 1-time increments the number of
	front loading operations.
F LOADING
H05	Displays in 1-hour increments the amount of
	time during which the LCD monitor has lighted.
LCD ON
H11	Displays in 1-hour increments the amount of
	time during which the drum has rotated.
DRUM RUNr	(Can be reset.)
H12	Displays in 1-hour increments the amount of time
	during which the tape has been running in the FF,
TAPE RUNr	REW, PLAY, SEARCH (JOG, VAR and SHTL),
	REC and EDIT modes (but not in the JOG, VAR,
	SHTL or STILL mode). (Can be reset.)
H13	Displays in 1-time increments the number of
	times the tape has been threaded (loaded) and
THREADINGr	unthreaded (unloaded). (Can be reset.)
H14	Displays in 1-time increments the number of
	front loading operations.
F LOADINGr	(Can be reset.)
H15	Displays in 1-hour increments the amount of
	time during which the LCD monitor has lighted.
LCD ON r	(Can be reset.)
H30	Displays the number of times the power has
	been turned on.
POWER ON

If “T&S&M” has been selected as the setup menu item No.006 (DISPLAY SEL) setting, a message appears in the mode display area whenever a warning or error

has occurred. When a multiple number of errors have occurred, the one with the highest priority is displayed.

Priority				Display and description
Higher	Error messages (see error message table):						When any
	problem arises with the VTR’s operation, the AUTO OFF
	lamp lights, and an error message is displayed.
	INT SG : If, when “INT SG” has been selected as the audio
	input setting by					IN) on the <VIDEO> menu or by the
					(VIDF1
	<AUDIO> or <AUDIO SHIFT1> menu, and the EDIT button is
	pressed, this message is displayed for the first two seconds
	when editing is started. In the same way, it is displayed for the
	first two seconds when recording is started.
	NO INPUT:			If, when input signals (but not analog audio
	signals) are not supplied to the input connector selected by
			(VID IN) on the <VIDEO> menu or by the <AUDIO> or
		F1
	<AUDIO SHIFT1> menu, the EDIT button is pressed, this
	message is displayed for the first two seconds when editing
	is started. In the same way, it is displayed for the first two
	seconds when recording is started.
	Warning messages (see warning message table):						When
	a warning occurs in this VTR, the warning lamp lights, and a
	warning message is displayed. When a multiple number of
Lower	warnings have occurred, the one with the highest priority is
	displayed.

F1

<Note>

The resettable table hour-meter information items will be reset by your dealer when maintenance or other work is performed.

119