Panasonic AJ-HD1700PE operating instructions 101

Setup menus

<AUDIO>	(continued)
No./Item					Description of setting
739		For selecting		the CH2 output status of the
		main signal line in the search mode.
CH2 CUE SEL		0000			OFF	:
			The CUE signal is not output.
		0001		ON		:
			The CUE signal is output.
		<Note>
		For details on the audio output statuses, refer to “Audio
		outputs in the search mode” on page 103.
740		For selecting		the CH3 output status of the
		main signal line in the search mode.
CH3 CUE SEL		0000			OFF	:
			The CUE signal is not output.
		0001		ON		:
			The CUE signal is output.
		<Note>
		For details on the audio output statuses, refer to “Audio
		outputs in the search mode” on page 103.
741		For selecting		the CH4 output status of the
		main signal line in the search mode.
CH4 CUE SEL		0000			OFF	:
			The CUE signal is not output.
		0001		ON		:
			The CUE signal is output.
		<Note>
		For details on the audio output statuses, refer to “Audio
		outputs in the search mode” on page 103.
742		For selecting		the CH5 output status of the
		main signal line in the search mode.
CH5 CUE SEL		0000			OFF	:
			The CUE signal is not output.
		0001		ON		:
			The CUE signal is output.
		<Note>
		For details on the audio output statuses, refer to “Audio
		outputs in the search mode” on page 103.
743		For selecting		the CH6 output status of the
		main signal line in the search mode.
CH6 CUE SEL		0000			OFF	:
			The CUE signal is not output.
		0001		ON		:
			The CUE signal is output.
		<Note>
		For details on the audio output statuses, refer to “Audio
		outputs in the search mode” on page 103.
744		For selecting			the CH7 output status of the
		main signal line in the search mode.
CH7 CUE SEL			0000		OFF		:
			The CUE signal is not output.
		0001		ON		:
			The CUE signal is output.
		<Note>
		For details on the audio output statuses, refer to “Audio
		outputs in the search mode” on page 103.

The underlining (__) denotes the factory setting mode.

No./Item

Description of setting

745

For selecting the

CH8 output status of the

main signal line in the search mode.

CH8 CUE SEL

0000

OFF

:

The CUE signal is not output.

0001

ON

:

The CUE signal is output.

<Note>

For details on the audio output statuses, refer to “Audio

outputs in the search mode” on page 103.

746

For selecting the monitor output.

0000

MANU

:

MONI CH SEL

The signal selected by the MONITOR SELECT

button is output.

0001

AUTO

:

The PCM audio signal is output in the

j1.0 k

to

i2.0 k speed range; the CUE signal is

automatically output at all other speeds.

0002

PCM

:

The PCM audio signal is output in the

j32 k to

i32 k speed range.

<Notes>

• When “AUTO” is selected and a tape in any format

except DVCPRO HD-LP is played back, the PCM

audio signals are output in the -1.0

k to +1.1 k speed

range.

• This setting takes effect when the L and R MONITOR

SELECT switches on the VTR’s front panel have

selected a channel from CH1 to CH8.

(If they have selected CUE, the CUE signal is output

at all speeds regardless of this menu item’s setting.)

747

For selecting the

channel

for

the monitor

output to be switched to CUE.

MON AUTO

When

a setting other than “MANU” has been

SEL

selected for setup menu item No.746 (MONI CH

SEL), the CUE signal is automatically output to

the monitor output in accordance with

the

operation mode, and the monitor channel to be

switched to CUE is selected automatically.

0000

L/R :

The

CUE signal is output both

to the Lch and Rch.

0001

L

:

The CUE signal is output to the

Lch only .

0002

R

:

The CUE signal is output to the

Rch only.

748

For selecting whether to enable or inhibit the

operation of the MONITOR SELECT button on

MONI SEL INH

the front panel.

0000

OFF

:

The

button’s

operation

is

enabled.

0001

ON

:

The button’s operation is

inhibited.

0002

ON1

:

In

the

FULL

display

mode,

operation is prohibited; in the

FINE

display

mode

only,

operation is enabled.

<Note>

Whether to enable or inhibit the button’s operation can

be selected for channels whose signals have not been

mixed by the setup menu item No.737 (MONI MIX)

setting.

101