Panasonic AJ-HD1700PE Cue point registration, When registering cue points by number, Search mode

(ROTATE)F4 setting

CUE

Function menus

<CUE>

Search mode

The desired search point can be selected, and the tape can be prerolled to that point.

When the display page has been changed using the

[F1 (PREV) or F2(NEXT) button on the <CUE>

menu, the following applies depending on the setting for F3 (PAGE) on the <CUE SHIFT> menu.

When “MANU” is set:

Both the search and registered points move to the top of the changed page.

When “AUTO” is set:

Only the search point moves to the top of the changed page; the registered point does not move.

Cue point registration

Turn the ADJUST dial to highlight the point which is to

be registered. When the button SETis pressed, the

When “AUTO” is set:

When a page become full during the cue point registration process, operation automatically moves to the next page, and registration continues. When CUE96 on the last page is reached, registration is

automatically terminated. (*	2 )
A change must be made to the points to be registered

if more cue points are to be registered. Check that the cue point registration mode is established, change the page, and change the points to be registered. In this case, the search point will not be changed.

(*2)If “ON” is selected as the

on the <CUE SHIFT> menu, the registration of the cue points will rotate from page 9 (CUE96) to page 0 (CUE01).

current tape position is registered as the cue point.

The following applies depending on the setting for

F3

(PAGE) on the <CUE SHIFT> menu.

When “MANU” is set:

Operations are performed on the selected page.

Press the

to

register

the

points

in

SET

button

succession (CUE

¢1

> CUE

¢2

> ... > CUE

¢6) on

the selected page. (Any points already registered will

be overwritten.)

The

registration is

automatically terminated

when

CUE

¢6 is registered on the page. (*

1

)

A change must be made to the points to be registered

if more cue points are to be registered. Check that

the cue point registration mode is established, change

the page, and change the points to be registered. In

this case, the search point will

also

move

automatically to the top (CUE

¢1)

of

the changed

page.

(*1)If “ON” is selected as the

](ROTATE) setting

F4

on the <CUE SHIFT> menu, the registration of the

cue points will rotate on the same page in the

following

order: CUE

¢1

> CUE

¢2 > ... >

CUE

¢6> CUE

¢1

> CUE

¢2 > ...

When registering cue points by number

1.Turn the ADJUST dial to highlight the desired registered point display area.

2. Press the buttonT twice. Only the “10’s” hour

digit of the selected cue point is now highlighted, and the change enable status is established.

<Note>

When “REV” has been selected as the setup menu item No.144 (TC INPUT) setting, the input of the number will start from the higher-order digit (it will be displayed starting from the far right).

3.Input the number using the number keys. Movement from one digit to the next is done automatically after one number has been input.

The desired digit can also be selected by turning the ADJUST dial.

4. To enter the number,	press the	button.		ENT
When the display	screen is switched or when		the

Cbutton is pressed during the input process, the change enable status is released, and the setting is canceled.

53