Panasonic AJ-HD1700PE Superimpose screen, Characters displayed, TYPE on the TC SHIFT menu, Stop

Superimpose screen

The control signals, time code, etc. are displayed on this screen using abbreviations.

TV monitor

TCR 22 :22 :22 :22

Abbreviations

CTL: Control signal count value

TCR: Time code data recorded in the SBC area

TCR.: Time code data recorded in the VAUX area

UBR: User’s bit data recorded in the SBC area

UBR.: User’s bit data recorded in the VAUX area

TCG: Time code data of the time code generator

UBG: User’s bit data of the time code generator

<Note>

[T2R], [T2R.], [U2R] or [U2R.] is displayed when the data has not been read correctly from the tape.

Characters displayed
The	background of the characters superimposed on
the	display screen can be changed using	(C
			F5

TYPE) on the <TC SHIFT> menu.

Display position
The position of the characters superimposed on the
display can be changed using	(C HPOS) andF2	F3

(C VPOS) on the <TC SHIFT> menu and the ADJ dial.

TCR 22 :22 :22 :22

TCR 22 :22 :22 :22

TV monitor TV monitor

Operation mode

The VTR’s operation mode can also be displayed using F4(DISPLY) on the <TC SHIFT> menu.

TCR	22 :22 :22 :22
STOP		VTR operation mode
	TV monitor

TCR 22 :22 :22 :22	T C R 22 : 22 : 22 : 22
TV monitor	TV monitor

<Note>

When the 23/24 Hz mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting, the time code and other information superimposed on

the MONITOR and VIDEO OUT3 connectors are not displayed.

113