Operation
Starting the programme
Press the Start or OK buttons. The programme will begin.
The Start indicator light will come on.
A programme should only be cancel‐ led in the first few minutes, if at all. Otherwise important programme stages could be omitted.
Display
The estimated duration of the pro‐ gramme selected appears in hours and minutes in the display before the pro‐ gramme begins. During the programme, the time left until the end of the pro‐ gramme is displayed.
Symbols appear to indicate which stage the programme is at:
Interim rinse Final rinse Drying
Finish
The programme duration displayed may vary with the same programme. It is in‐ fluenced by, among other things, the water temperature at each intake, the reactivation process, the type of deter‐ gent, the amount of crockery and how dirty it is.
When a programme is selected for the first time, the display shows an average duration for a cold water intake.
The durations shown in the Programme chart refer to standard test loads and temperatures.
Each time a programme is run, the electronic unit takes the new conditions into account, and calculates the pro‐ gramme duration required.
45