Electrical connection
Electrical connection U.K.
All electrical work must be car‐ ried out by a suitably qualified and competent person, in accordance with current local and national safety regulations (BS 7671 in the UK).
Ensure power is not supplied to the ap‐ pliance until after installation work has been carried out.
The appliance is supplied with a mains cable with moulded plug ready for con‐ nection to a
Please ensure the connection data quo‐ ted on the data plate match the house‐ hold mains supply.
Connection should be made via a suita‐ ble switched socket which is easily ac‐ cessible after installation.
For extra safety it is advisable to protect the appliance with a suitable residual current device (RCD). Contact a quali‐ fied electrician for advice.
Do not connect via an extension lead. Extension leads do not guarantee the required safety of the appliance (e.g. danger of overheating).
This appliance must not be connected to the inverter of an autonomous power supply, e.g. a solar power system.
When switching the appliance on, a surge in power could trigger the safety
This appliance must not be used with
Non-rewireable plugs BS 1363
The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is em‐ bossed in words on the base of the plug (as applicable to the design of plug fitted).
Replacement fuses should be ASTA ap‐ proved to BS 1362 and have the cor‐ rect rating. Replacement fuses and fuse covers may be purchased from your lo‐ cal electrical supplier.
THIS APPLIANCE MUST BE EARTHED
78
