Miele 09 645 470 manual Correct installation, Warning and Safety instructions

Warning and Safety instructions

Correct installation

The dishwasher must be installed and connected in compliance with the installation diagram supplied.

Take care, both before and during installation of the dish‐

washer, not to cut yourself on the metal parts. Danger of in‐ jury. Wear protective gloves.

The dishwasher must be correctly aligned to ensure problem-free operation.

In order to ensure stability, built-under and integrated dishwash‐ ers must only be installed under a continuous worktop which is se‐ cured to adjacent cabinetry.

If you want to convert your freestanding dishwasher to a built-un‐ der ("U") model, you will need to order the appropriate conversion kit. If you remove the existing plinth, you must replace it with a U- model plinth. This is necessary to avoid the risk of injury caused by protruding metal parts.

The door springs must be adjusted equally on both sides. They are correctly adjusted when the door remains stationary when left open at 45°. It is important that the door is held in place by the springs and cannot fall open.

The appliance may only be used with correctly adjusted door springs.

15