Loading the dishwasher
Cutlery
3D cutlery tray (depending on model)
See "Loading the dishwasher / Load‐ ing examples" for examples of how to load crockery and cutlery.
Arrange the cutlery in the tray as shown.
To make unloading much easier, cutlery should be grouped in zones, one for knives, one for forks, one for spoons, etc.
Spoon heads should be placed in con‐ tact with at least one of the serrated re‐ tainers on the base of the cutlery tray to ensure that water runs off them freely.
The upper spray arm must not be blocked by items which are too big (e.g. cake slices).
The side sections of the tray can be moved into the middle to accommodate tall items of crockery in the upper bas‐ ket.
If spoon handles do not fit between the holders, then lay them the other way round.
You can use the yellow slide to adjust the height of the middle section of the cutlery tray to make more room for large items of cutlery, such as serving spoons and ladles.
35
