Problem solving guide
General problems
Problem | Cause and remedy | |
The indicator lights and The display has switched off automatically to save | ||
display are dark. | energy. | |
| Switch the dishwasher on again with the but‐ | |
| ton. | |
| ||
The following fault mes‐ The salt reservoir lid has not been closed properly. | ||
sage is appears in the | Close the salt reservoir lid. | |
display: |
| |
If the salt reservoir lid has opened during a pro‐ | ||
Salt reservoir lid | ||
gramme: | ||
| ||
| Switch the dishwasher off and back on again with | |
| the button. | |
| Close the salt reservoir lid. | |
| Start the programme again. | |
Detergent residue is left | The dispenser was still damp when detergent was | |
in the dispenser at the | added. | |
end of a programme. | Make sure the dispenser is dry before adding de‐ | |
| tergent. | |
| ||
The detergent dispens‐ Clogged detergent residue is blocking the catch. | ||
er lid cannot be closed | Clean the detergent from the catch. | |
properly. |
| |
|
| |
At the end of a pro‐ | This is caused by the drying system and does not in‐ | |
gramme there is a film | dicate a fault. The moisture will dissipate after a | |
of moisture on the in‐ | while. | |
side of the door and the |
| |
interior walls. |
| |
|
| |
Water remains in the | Before rectifying the problem: | |
wash cabinet at the end | Switch the dishwasher off with the button. | |
of a programme. |
| |
The filter combination in the wash cabinet is clogged. | ||
| ||
| Clean the filter combination (see "Cleaning and | |
| care, Cleaning the filters"). |
The drain pump or
Clean the drain pump or the
The drain hose is kinked.
Remove any kink from the drain hose.
68