Cleaning and care
Checking the filters in the wash cabinet
The filter combination in the base of the wash cabinet retains coarse soil from the suds solution, preventing it access‐ ing the circulation system and
This dishwasher must not be used without all the filters in place.
Collection of coarse soil may cause the filters to clog. The level of soiling and time it takes before the filters need cleaning will vary depending on use.
The message Check filters will appear in the display after every 50 programme cycles (factory default setting).
You can set the interval for this mes‐ sage to appear to between 30 and 60 programme cycles (see "Settings menu, Check filters").
Check the filter combination.
Clean it, if necessary.
Then confirm the message with OK. The message will go out.
Cleaning the filters
Switch the dishwasher off.
Turn the handle
Lift the filter combination out of the dishwasher . Remove any coarse particles and rinse the filter well un‐ der running water.
Use a nylon brush if necessary.
Make sure that when cleaning the filters, no coarse soil falls into the circulation system, causing a block‐ age.
61
