Korg Speaker System owner manual Controlling panpot stereo position, Effect control

sages to create changes in dynamics within the musical data of the song. (☞p.31, 49 in the Parame- ter Guide “Volume” - “MIDI)

By using the universal exclusive Master Volume mes- sage, you can adjust the overall volume without changing the volume balance between timbres or tracks. (☞p.120 “About system exclusive messages”)

Controlling panpot (stereo position)

Panpot (CC#10) [Bn, 0A, vv]

(vv: value, where 00 is far left, 64 is center, and 127 is far right)

When the above CC# is assigned to the ASSIGNABLE PEDAL or as the B-mode function of a REALTIME CONTROL knob [1]–[4], operating that controller will transmit Panpot messages, and the panning will change. When this message is received, the result will be the same as when the controller is operated.

•When you set the “Pan” (P0: Mixer tab) in Sequencer mode or Song Play mode, or when you re-select the song or return to the beginning of the measure in Sequencer mode, Panpot messages (except for RND) will be transmitted by each track whose “Status” is BTH, EXT, or EX2 (☞“Pan” - “MIDI” on p.49 and 103 in the Parameter Guide).

Post insert effect panpot (CC#08)

[Bn, 08, vv] (vv: value, where 00 is far left, 64 is center, and 127 is far right)

When the above CC# is assigned to the ASSIGNABLE PEDAL or as the B-mode function of a REALTIME CONTROL knob [1]–[4], operating that controller will transmit Post Insert Effect Panpot messages, and the panning of the sound following the insert effect will change. When this message is received, the result will be the same as when the controller is operated.

•In Program mode and Sampling mode, this message is transmitted/received on the global MIDI channel. In Combination, Sequencer, and Song Play modes, this message is transmitted/ received on the MIDI channel specified for each insert effect.

•When you set “Pan (CC#8)” (P0: Insert Effect tab) in Sequencer mode or Song Play mode, or when you re-select the song or return to the beginning of the measure in Sequencer mode, Post Insert Effect Panpot messages will be transmitted by each track whose “Status” is BTH, EXT, or EX2 (☞“Insert Effect” - “MIDI” on p. 76 and 110 in the Parameter Guide).

Effect control

Effect control 1 (CC#12) [Bn, 0C, vv]

Effect control 2 (CC#13) [Bn, 0D, vv]

When the above CC# is assigned to the ASSIGNABLE PEDAL or as the B-mode function of a REALTIME CONTROL knob [1]–[4], operating that controller will transmit Effect Control 1/2 messages, and the specified dynamic modulation will be controlled. When this message is received, the result will be the same as

when the controller is operated.

Although various types of control change can be selected as dynamic modulation sources, Effect Con- trol 1 (CC#12) and 2 (CC#13) are dedicated for dynamic modulation.

Effect 1 depth (Send 2) (CC#91) [Bn, 5B, vv] Effect 3 depth (Send 1) (CC#93) [Bn, 5D, vv]

When the above CC# is assigned to the ASSIGNABLE PEDAL or as the B-mode function of a REALTIME CONTROL knob [1]–[4], operating that controller will transmit Effect 1 Depth (Send 2) or Effect 3 Depth (Send 1) messages, and the send level 1 or 2 to the mas- ter effects MFX1 or MFX2 will be controlled respec- tively. When this message is received, the result will be the same as when the controller is operated.

On the corresponding MIDI channels, this will simul- taneously control the timbre/track setting as well as the setting following the insertion effect.

•In Combination, Sequencer, and Song Play modes, the actual send level of the timbre/track is determined by multiplying this value with the send 1/2 settings for each oscillator (Program P8: Routing tab). (☞“Send 1, 2” - “MIDI” on p.25, 26, 42, 75, and 110 in the Parameter Guide.)

•When you adjust “Send 1” or “Send 2” (P8: Routing tab, Insert Effect tab) in Sequencer mode or Song Play mode, or when you re-select a song or return to the beginning of the measure in Sequencer mode, Send 1/2 will be transmitted by each track whose “Status” is BTH, EXT, or EX2. (☞“Send 1, 2,” “Insert FX” - “MIDI” on p.76 and 110 in the Parameter Guide).

Effect 2 depth (IFX1–5 on/off) (CC#92) [Bn, 5C, vv] Effect 4 depth (MFX1 on/off) (CC#94) [Bn, 5E, vv] Effect 5 depth (MFX2 on/off) (CC#95) [Bn, 5F, vv]

Separately from the effect on/off settings in each mode, Global P1: Basic Setup “Effect Global SW” allows you to turn off insert effects IFX1–5 and master effects MFX1 and MFX2. If you check “IFX1–5 Off,” “MFX1 Off” or “MFX2 Off,” the corresponding mes- sage will be transmitted with vv=0 [00]. If you uncheck these settings, the corresponding message will be transmitted with vv=127 [7F]. If you check these set- tings, the corresponding effect(s) will be turned off as a group. If you uncheck these settings, the on/off set- tings of each mode will be used. The same applies to reception. (vv of 00 is off, and 01 or greater is the origi- nal setting.) These messages are transmitted/received on the global MIDI channel. (☞“ON/OFF” - “MIDI” on p.26 and 27 in the Parameter Guide.)

These messages are defined simply for use in adjusting the effect levels, and may not have the same function on another instrument connected to the TRITON.

Using various controllers for control

Foot controller (CC#04) [Bn, 04, vv]

If the above CC# is assigned as the ASSIGNABLE PEDAL function, this message will be transmitted when the controller is operated.

MIDI applications Basic functions

117