all protocols except LAT, TCP/IP, and AppleTalk) or service 2 (BINARY_P1, for LAT and TCP/IP). Refer to Appendix B and the individual protocol chapters for additional information on services.
To change the printer reset on a TROY XCD print server with XAdmin, double click on the print server name, click on the Services tab, double click on the desired service, and then select the appropriate Printer Control String. With WebXAdmin, click on Configure Service, and select the desired service, choose the appropriate reset string, and then click Submit.
Alternatively, you may use the print server console by typing in the following command:
SET SERVICE servicename EOT stringno
where "servicename" is the name of the service (do a SHOW SERVICE command for a list of services) and stringno is the number of the string. For example to use string 3 (the PostScript
SET SERVICE BINARY_P1 EOT 3
Changing the Print Server Configuration (Optional)
In addition to changing the printer reset string, you can modify the TROY XCD print server configuration in a number of other ways. The procedure and commands for changing the configuration are described in Appendix A.
