e. You will now need to set the subnet mask by typing SET IP SUBNET subnetmask, where subnetmask is the desired subnet mask you wish to assign to the TROY XCD print server (check with your network manager for the subnet mask to use). For example:
Local> SET IP SUBNET 255.255.255.0
If you do not have any subnets, use one of the following default subnet masks:
255.255.255.0 | for class C networks |
255.255.0.0 | for class B networks |
255.0.0.0 | for class A networks |
f.The type of network you have can be identified by the leftmost group of digits in your IP address. The value of this group ranges from 192 through 255 for Class C networks (e.g., 192.189.207.3), 128 through 191 for Class B networks (e.g., 128.10.1.30), and 1 through 127 for Class A networks (e.g., 13.27.7.1).
g.If you have a gateway (router), enter its address
with the command SET IP ROUTER routeraddress, where routeraddress is the desired IP address of the gateway you wish to assign to the TROY XCD print server. For example:
Local> SET IP ROUTER 192.189.207.1
h.To verify that you have entered the IP information correctly, type SHOW IP.
