Re-setting the filter indicator
The filter indicator still flashes in the
display.
^Touch the access button "p"soit
turns yellow.
The various appliance zones are now
visible.
^Touch the sensor button for the
refrigerator so it turns yellow.
^Note the position of the Xbutton, but
do not touch.
^Touch the access button "p" again so
it turns white.
Only the access button "p" is visible.
^Place one finger on the position of
the Xbutton and hold (the Xbutton
will not be visible).
^While holding down the Xbutton,
press the access button "p" once.
Keep holding the Xbutton down until
the following appears in the display
(approx. 5 seconds).
^Tap the Xbutton until an ^appears
in the display.
^Touch the access button "p" again.
By touching the Xbutton you can
select the following settings:
^0:filter is installed
^1: filter is not installed (external filter)
^2: filter change confirmed
^-:return to menu
^Tap the Xbutton until ^2appears in
the display.
^1shouldonly be selected if an
external filter or bypass cartridge is
being used. See "Deactivating the
water filter".
^Press and hold the access button "p"
for 2 seconds to confirm the filter
change.
The filter is now reset.
Water filter
36