MasterCool control panel options for RemoteVision
Selectable
options
Description of function
;-Back
;2Reboot the module
;3Reset the module to factory settings
;4Enter Ad-Hoc Mode
Note: If you cannot select any option (other than ;-"back"), the module has not
been installed correctly.
Status indicators Description of function
Flashing ;~Module booting phase
Flashing ;|Connection to router established, no IP address assigned
Flashing ;< In Ad-Hoc Mode, not connected
Solid ;= In Ad-Hoc Mode, connected
Flashing ;‡No connection to Network
Solid ;#Connected to Network
RemoteVision
81