Installing the appliance
Note:
–Do not twist or jam the appliance inside the niche. When unscrewing the
–The adjustment of the rear feet is aided if the appliance is lifted at the rear (tipped forward slightly).
–If using a wooden beam as an alternative
–Do not use a power tool to adjust the rear feet!
Attaching the appliance to the installation niche
^ | Pull out the plate side lugs i. |
^ | Secure the attachment plate side lugs. |
If there is a fairly large gap above the appliance, cut a wooden beam to fit exactly and place it in the gap.
^Screw the attachment plate lugs h to the overhead furniture/fixtures.
If there is no way to attach the top of the appliance, it can be attached to the sides of the installation niche.
^If necessary, shorten the filler strip j to the required height.
^Place the 2 strips on top of each other k.
^Insert the filler strip until you hear it click into place l.
66
