Settings
Custom settings
In the custom settings mode you can select and change functions. The function possibilities are described in the respective chapters of this manual.
Function | Display text |
|
|
Temperature | † |
°C - °F |
|
|
|
RemoteVision | ; |
Module settings |
|
|
|
Button sound on/off | = |
Confirm filter | ^ |
changes |
|
|
|
Exit Custom | c |
Settings mode |
|
|
|
Turning the button sound On/Off
If you prefer the buttons to be silent when touched, the button sound can be turned off.
^Touch the access button "p" so it turns yellow.
^Touch the sensor button for the refrigerator section so it turns yellow.
^Note the position of the X button, but do not touch.
^Touch the access button "p" again so it turns white.
Only the access button "p" is visible.
^Place one finger on the position of the X button and hold (the X button will not be visible).
^While holding down the X button, press the access button "p" once. Keep holding the X button down until the following appears in the display (approx. 5 seconds).
^Tap the X button until = appears in the display.
^Touch the access button "p" to confirm.
11
