A-2. Install the Mounting Plate
Step. 1 Setup position
a. Draw a line down the middle of the studs(See the Wall Consa_ction, page 5)
b. Draw a vertical line on the wall at the center of the 30" wide space.
NOTE: Use the wall template for the rear wall.
Reference Wall Template prior to proceeding.
Installation of this product require TWO persons.
Step. 2 Drilling
Reference the Wall Template.
Step. 3 Install the damper
Fit the damper into the house duc_ Be sure that the damper hinge is on the top and the dotnper free into the wall outlet.
Takethe28"foam
tapesandremove thepaperfrom stickysidePress. thestickysideonto
the front edge of the
damper. (Don't stretch the foam
tape)
Plate
Step. 4 Tightening the screws
ToAttach the mounting plate to the wall using the toggle bolt assemblies and/or lag screws:
