Installation | GB |
Before connecting the appliance to the power supply, check that the wires of your electric installation have sufficient diameter to supply power to the appliance normally. The fuse for the installation should be 10 amps.
It is necessary to provide a bipolar
The electric connection should be done before the appliance is set in the cabinet.
The drawer should be connected by the (standard) power cord with three 1 mm² couplers (1 single phase + 1 N + ground) to the
corresponds to ground on the appliance and should be connected to the ground of the installation.
In the case of a connection via an electric outlet, the outlet should be accessible after the installation of the appliance.
The neutral on the heating drawer (blue wire) should be connected to neutral on the power supply.
If the supply lead is damaged, it must be replaced by an equivalent lead (H05RNF 3x1mm²) available from the
25