Manuals / Woods Equipment / Lawn and Garden / Brush Cutter

Woods Equipment BW1620XQREV, BW2400XQ Wing Assembly, Install Wing Cylinder and Transport Lock

Models: BW2400X BW1620XQREV BW2400XQ BW1620X BW1620XQ

1 82
Download 82 pages 25.9 Kb
Page 38
Image 38

WING ASSEMBLY

Install Wing

CAUTION

Use a suitable lifting device of sufficient capac- ity. Use adequate personnel to handle heavy com- ponents.

13. Hinge pin

33. 1" Flat washer

64. Spring pin, 1/4 x 1-1/2

Figure 29. Right Wing Installation (Typical)

The wing must be installed in the following sequence and will require at least two people. A floor jack or a suitable lifting device will be helpful to align decks when installing the hinge pin.

1.Remove hinge pin (13) from center section.

2.Place wing assembly adjacent to the center section and align hinge sections.

3.Insert hinge pin through the hinge sections and secure with spring pin (67) and washer (35) on both ends.

4.Repeat procedure of opposite wing.

Install Wing Cylinder and Transport Lock

(Figure 30)

1.Slide rod end of wing cylinder (5) through box end of wing transport lock bracket (20).

2.Place base end of cylinder and wing transport lock bracket over cylinder lug on center section and align holes. Secure to cylinder lug using clevis pin (19) and two cotter pins (63).

3.Remove plug from base end of hydraulic cylinder and rod end of cylinder.

4.Extend cylinder fully and replace plug in base end of cylinder. This trapped air will help push wing down.

5.Align cylinder rod end with slotted holes on wing cylinder lugs and secure using clevis pin (18) and two cotter pins (63).

6.Insert lock-up pin (29) in lower hole and secure using lynch pin (40).

7.Install bushing (24) and elbow (23) to the rod end of cylinder (5). Position elbow to point to the center section.

5. Hydraulic cylinder

18. 1" x 4.58" Clevis pin

19. 1" x 5.08" Clevis pin

20. Wing transport lock

23. 1/4 NPT x 1/4 NPT Elbow, restricted

24. 1/2 NPT x 1/4 NPT Reducer bushing

25. 1/4 NPT x 1/4 NPT x 264" Hose

29. 1 x 8.41 Headless pin

33. 1" SAE Flat washer

40. Lynch pin, chain and cotter assembly

63. 1/4 x 1-1/2 Cotter pin

Figure 30. Wing Cylinder and Wing Transport Lock Installation

38 Assembly

MAN0764 (11/5/2008)

 

 

Page 37 Page 39
Page 38
Image 38
Woods Equipment BW1620XQREV, BW2400XQ manual Wing Assembly, Install Wing Cylinder and Transport Lock
Page 37 Page 39

BW2400X, BW1620XQREV, BW2400XQ, BW1620X, BW1620XQ specifications

Woods Equipment has established itself as a trusted name in the landscape and agricultural equipment sector, offering a wide range of high-performance products tailored to meet various needs. Among its standout offerings are the BW1620XQ, BW1620X, BW2400XQ, BW1620XQREV, and BW2400X models, known for their robust design and exceptional functionality.

The BW1620XQ is designed for efficient brush cutting, making it an ideal choice for land maintenance and clearing dense underbrush. One of its main features is the heavy-duty construction, which ensures durability even under the toughest conditions. This model is equipped with a reinforced deck, providing added strength and longevity. It also features a powerful PTO-driven cutting system, allowing it to tackle tough growth with ease.

The BW1620X model offers similar capabilities to the BW1620XQ but is optimized for lighter tasks and smaller properties. It shines in residential applications, where maneuverability and ease of use are paramount. This model is lightweight and easy to attach, making it a favorite among homeowners who require a reliable tool for maintaining their yards and gardens.

For those requiring larger-scale solutions, the BW2400XQ provides increased cutting width and efficiency. This model excels in farm and large property applications, where speed and power are essential. Featuring advanced blade technology, the BW2400XQ offers superior cutting performance and reduced maintenance needs. Additionally, it boasts adjustable height settings, allowing users to customize their cutting experience based on the terrain and type of vegetation.

The BW1620XQREV is a revolutionary model that incorporates newer technology for even better performance and user experience. This model offers enhanced features such as improved blade design for finer cuts and an innovative quick-attach system that enables fast connectivity and disconnection from tractors.

Finally, the BW2400X model is the standard version of the BW2400XQ, providing similar power and efficiency without some of the specialized features, making it a cost-effective solution for users who need reliable equipment without as many bells and whistles.

In conclusion, Woods Equipment's BW1620XQ, BW1620X, BW2400XQ, BW1620XQREV, and BW2400X models each feature unique characteristics tailored to specific applications, ensuring users can find the right tool for their needs, whether for residential landscaping or large-scale agricultural tasks. Their emphasis on durability, efficiency, and user-friendly design makes them a preferred choice across various sectors.