Ref

Description

Frequency

1.

Driveline U-joint

10 Hours

2.

Telescoping shaft

10 Hours

3.

Carrier bearing block

40 Hours

4.

CV Body assembly

10 hours

 

(10 pumps minimum)

 

5.

Driveline shield

10 Hours

6.

Splined yoke

10 Hours

7.

Gearbox (above lower

Daily

 

line on dipstick)

 

8.

Tongue pivot

40 Hours

 

9.

Wheel yoke pivot

40 Hours

 

10.

Splitter gearbox

Daily

 

 

(bottom of side hole)

 

X = JACKSTAND PLACEMENT

11.

Tailwheel spindle

20 Hours

12.

Turnbuckle

40 Hours

 

Figure 5. Jackstand Placement and Lubrication Points

LUBRICATION

Do not let excess grease collect on or around parts, particularly when operating in sandy areas.

See Figure 5 for lubrication points and frequency or lubrication based on normal operating conditions. Severe or unusual conditions may require more fre- quent lubrication.

leakage, and contact your dealer if leakage occurs. Splitter Gearbox: Fill gearbox until oil runs out the side plug on gearbox.

Wing and Center Gearboxes: Fill gearbox until oil is between lowest ring and end of dipstick.

Use sealant on vent plug threads during installation. Check vent plug periodically and clean if it does not relieve pressure.

Use a lithium grease of #2 consistency with a MOLY (molybdenum disulfide) additive for all locations unless otherwise noted. Be sure to clean fittings thoroughly before attaching grease gun. One good pump of most guns is sufficient when the lubrication schedule is fol- lowed.

Gearbox Lubrication

For gearboxes, use a high quality gear oil with a vis- cosity index of 80W or 90W and an API service rating of GL-4 or -5. Check gearboxes daily for evidence of

Driveline Lubrication

1.Lubricate the driveline slip joint every eight operating hours. Failure to maintain proper lubrication could result in damage to U-joints, gearbox, and driveline.

2.Lower cutter to ground, disconnect driveline from tractor PTO shaft, and slide halves apart but do not disconnect from each other.

3.Apply a bead of grease completely around male half where it meets female half. Slide drive halves over each other several times to distribute grease.

20 Owner Service

(Rev. 11/9/2009)

MAN0764 (11/5/2008)

Page 19 Page 21
Page 20
Image 20
Woods Equipment BW2400XQ, BW1620XQREV manual Gearbox Lubrication, Driveline Lubrication, Description Frequency
Page 19 Page 21

BW2400X, BW1620XQREV, BW2400XQ, BW1620X, BW1620XQ specifications

Woods Equipment has established itself as a trusted name in the landscape and agricultural equipment sector, offering a wide range of high-performance products tailored to meet various needs. Among its standout offerings are the BW1620XQ, BW1620X, BW2400XQ, BW1620XQREV, and BW2400X models, known for their robust design and exceptional functionality.

The BW1620XQ is designed for efficient brush cutting, making it an ideal choice for land maintenance and clearing dense underbrush. One of its main features is the heavy-duty construction, which ensures durability even under the toughest conditions. This model is equipped with a reinforced deck, providing added strength and longevity. It also features a powerful PTO-driven cutting system, allowing it to tackle tough growth with ease.

The BW1620X model offers similar capabilities to the BW1620XQ but is optimized for lighter tasks and smaller properties. It shines in residential applications, where maneuverability and ease of use are paramount. This model is lightweight and easy to attach, making it a favorite among homeowners who require a reliable tool for maintaining their yards and gardens.

For those requiring larger-scale solutions, the BW2400XQ provides increased cutting width and efficiency. This model excels in farm and large property applications, where speed and power are essential. Featuring advanced blade technology, the BW2400XQ offers superior cutting performance and reduced maintenance needs. Additionally, it boasts adjustable height settings, allowing users to customize their cutting experience based on the terrain and type of vegetation.

The BW1620XQREV is a revolutionary model that incorporates newer technology for even better performance and user experience. This model offers enhanced features such as improved blade design for finer cuts and an innovative quick-attach system that enables fast connectivity and disconnection from tractors.

Finally, the BW2400X model is the standard version of the BW2400XQ, providing similar power and efficiency without some of the specialized features, making it a cost-effective solution for users who need reliable equipment without as many bells and whistles.

In conclusion, Woods Equipment's BW1620XQ, BW1620X, BW2400XQ, BW1620XQREV, and BW2400X models each feature unique characteristics tailored to specific applications, ensuring users can find the right tool for their needs, whether for residential landscaping or large-scale agricultural tasks. Their emphasis on durability, efficiency, and user-friendly design makes them a preferred choice across various sectors.
Top Page Image Contents