4.Pivot pin, 1-1/4

5.Pivot pin, 1

6.Attitude rod

24.Spacer

23.Retainer

25.Clevis

26.Tongue level link

27.Tongue level bracket

28.Tongue

29.Parking jack (not shown)

31. Hose holder

45.5/8 NC x 4-1/2 Hex head cap screw GR5

50.1/2 NC Flange lock nut

53.1/2 NC x 1-1/4 Hex head cap screw GR5

62.5/8 NC Lock nut

73.1" NC Hex nut

75.1/2 NC x 1-1/2 Carriage bolt

83.Spacer, 1" x 1"

Figure 26. Tongue Installation

Install Tongue (Figure 26)

NOTE: Route center and wing cylinder hoses before proceeding. See Install Hydraulic Hoses, page 33, for hose routing instructions.

NOTE: Use a suitable lifting device of sufficient capac- ity. Use adequate personnel to handle heavy compo- nents.

1.Attach tongue (28) to the center section using two 1-1/4 pivot pins (4), carriage screws (75), and hex nuts (50).

2.Thread hex nut (73) onto tongue level link (26). Raise tongue and insert level link through center pivot casting.

3.Attach each attitude rod (6) between the lugs on tongue and secure with spacer (83), clevis pin (5), carriage screw (75), and lock nut (50).

4.Attach parking jack (29) to the side of the tongue.

5.Attach second hex nut (73) to tongue level link (26) on the back side of center pivot casting.

6.Attach hose holder (31) to the top of the tongue using two cap screws (53) and lock nuts (50).

Install 3-Joint Drive (Figure 27)

Before installing cutter input driveline to gearbox, check the tag wired to the driveline and the tag wired to the input shaft of gearbox. Ensure the tag rpm speeds match the rpm speed decal on front of cutter. After con- firming all speeds match, remove and discard tags and then complete driveline assembly.

1.Attach H-frame (30) to tongue with two bolts (77), sleeves (47), cup washers (60), and nuts (62).

2.Coat splined end of gearbox input shaft with grease.

3.Slide drive (33) onto shaft and align hole in drive yoke with groove on gearbox input shaft.

4.Secure with bolt and nut supplied with drive.

5.Secure driveline carrier bearing to H-frame with pin (69) and cotter pin (70).

36 Assembly

MAN0764 (11/5/2008)

 

 

Page 35 Page 37
Page 36
Image 36
Woods Equipment BW2400XQ, BW1620XQREV manual Install Tongue Figure, Install 3-Joint Drive Figure
Page 35 Page 37

BW2400X, BW1620XQREV, BW2400XQ, BW1620X, BW1620XQ specifications

Woods Equipment has established itself as a trusted name in the landscape and agricultural equipment sector, offering a wide range of high-performance products tailored to meet various needs. Among its standout offerings are the BW1620XQ, BW1620X, BW2400XQ, BW1620XQREV, and BW2400X models, known for their robust design and exceptional functionality.

The BW1620XQ is designed for efficient brush cutting, making it an ideal choice for land maintenance and clearing dense underbrush. One of its main features is the heavy-duty construction, which ensures durability even under the toughest conditions. This model is equipped with a reinforced deck, providing added strength and longevity. It also features a powerful PTO-driven cutting system, allowing it to tackle tough growth with ease.

The BW1620X model offers similar capabilities to the BW1620XQ but is optimized for lighter tasks and smaller properties. It shines in residential applications, where maneuverability and ease of use are paramount. This model is lightweight and easy to attach, making it a favorite among homeowners who require a reliable tool for maintaining their yards and gardens.

For those requiring larger-scale solutions, the BW2400XQ provides increased cutting width and efficiency. This model excels in farm and large property applications, where speed and power are essential. Featuring advanced blade technology, the BW2400XQ offers superior cutting performance and reduced maintenance needs. Additionally, it boasts adjustable height settings, allowing users to customize their cutting experience based on the terrain and type of vegetation.

The BW1620XQREV is a revolutionary model that incorporates newer technology for even better performance and user experience. This model offers enhanced features such as improved blade design for finer cuts and an innovative quick-attach system that enables fast connectivity and disconnection from tractors.

Finally, the BW2400X model is the standard version of the BW2400XQ, providing similar power and efficiency without some of the specialized features, making it a cost-effective solution for users who need reliable equipment without as many bells and whistles.

In conclusion, Woods Equipment's BW1620XQ, BW1620X, BW2400XQ, BW1620XQREV, and BW2400X models each feature unique characteristics tailored to specific applications, ensuring users can find the right tool for their needs, whether for residential landscaping or large-scale agricultural tasks. Their emphasis on durability, efficiency, and user-friendly design makes them a preferred choice across various sectors.
Top Page Image Contents