![](/images/new-backgrounds/1094822/9482283x1.webp)
Install Chain or Belt Shielding
Full chain or rubber shielding must be installed when operating in populated areas or other areas where thrown objects could injure people or dam- age property.
•If this machine is not equipped with full chain or rubber shielding, operation must be stopped when anyone comes within 300 feet (92 m).
•This shielding is designed to reduce the risk of thrown objects. The mower deck and protec- tive devices cannot prevent all objects from
escaping the blade enclosure in every mowing condition. It is possible for objects to ricochet and escape, traveling as much as 300 feet (92 m).
Install chain and rubber shields with hardware as shown. (Refer to Figure 35 and Figure 36 for Chain Shielding Installation; Figure 37 and Figure 38 for Belt Shielding Installation.)
NOTE: CHAIN SHIELDING - Center Section: Attach rear chain plates (4) to the top of center section. Attach center chain plate (18) to the bottom of the center sec- tion. Wing: Install four (two per wing)
(13)to the wing skid shoes. Secure with carriage bolts
(14)and flange lock nuts (15). See Figure 36.
1.Front center chain plate
2.Front right chain plate
3.Front left chain plate
4.Rear chain plates
8.Pin,
11.5/16 Chain,
16.3/8 NC x 1 Carriage bolt
17.3/8 NC Flange lock nut
18.Rear chain plate, center
Figure 35. Chain Shielding Installation - Center Section
42 Assembly | MAN0764 (11/5/2008) |
|
|