1.When you get the "Local>" prompt after connecting to the console, enter the command
SET POP3 ADDRESS ipaddress
where ipaddress is the IP address of your POP3 server (consult with your network administrator if you do not know this address).
2.Enter the commands:
SET POP3 NAME mailboxname
SET POP3 PASSWORD emailpassword
where mailboxname is the name of the remote TROY XCD print server mailbox and emailpassword is the password associated with this mailbox. Usually the mailbox name is the same as the first part of the
3.The print server is set by default to poll the POP3 server every 30 seconds. If you wish to change this value, enter the command:
SET POP3 POLLING rate
where rate is the polling rate in seconds.
4.If you have enabled notification, enter the command:
SET SMTP ADDRESS ipaddress
