JetAdmin and then use NWAdmin or PCONSOLE to add the print queue. If possible, TROY XCD recommends that you upgrade to JetAdmin 3.xx (available on the HP web site at http://www.hp.com).
1.Make sure that JetAdmin 3.xx is running on your system and that you have sufficient privileges to use it to create print queues. If you are using the Microsoft NetWare client on your workstation, make sure that you have installed Services for NetWare Directory Services in the Network control panel.
2.Click on Start, select Programs, select the HP JetAdmin Utilities 3.0 folder, and then select HP
JetAdmin.
3.One or more TROY XCD print server NetWare services will show up in the list of printers (the default service names are listed in the Default Print Server Names section at the beginning of this chapter). Single click on the one that you wish to configure and then go the menu bar, select File and then Modify.
Important Note: V3.59 and earlier firmware do not support more than one service and one port (the firmware version is listed on the
4.If desired, change the print server name and description. Click Next. Do this with caution because this will change the print server service name, and will therefore affect any other protocols that use this service.
