NetWare P2 tab to configure the XConnect 100 second parallel port, or the NetWare S2 tab to configure the XConnect 100 second serial port.
•If it is not already selected, select Queue Server as the operating mode.
•Click on the ▼ button and select the NDS tree (if you are using the Microsoft NetWare client, you must type in the name of the tree)..
•Click Change... button to select the NDS context where the queue will reside (if you are using the Microsoft client, you must type in the name of the context).
•If desired, you may change the print server name (do this with caution, because it changes the print server service name and will therefore affect any other protocols that use this service).
If you are using the Microsoft Client for NetWare, STOP HERE. Go to the Adding NetWare Print Queues Using NWAdmin section to complete the configuration.
6.Click on the Change NDS Queues... button to configure an NDS print queue or click the Change Bindery Queues... to configure a bindery mode queue.
7.Two windows will appear, Available Print Queues and Serviced Print Queues. First go to the Available Print Queues window:
•If you are configuring an NDS queue, click on the context where the print queue will reside.
