configuration changes. If you are using WebXAdmin, click Submit and exit the browser. Proceed to the next section, Adding NetWare Print Queues using NWAdmin.
If you are using bindery mode with XAdmin (not available with WebXAdmin), you may click on the Add Queue button to directly add a NetWare bindery queue:
•Click Create. Use the ▼ button to change the file server volume and then enter any unique name for the print and click OK.
•Click Yes when asked if you want to add the queue to the service list, click OK and Close. The queue will appear in the Bindery Print Queues window. Click OK and then Yes. You can now use the print queue from a NetWare workstation. Skip to the Configuring the Windows Printer section.
If you are using bindery mode with WebXAdmin, click Configure NetWare from the main menu, type in the name of the file server where the print queue will reside, and click Add. Proceed to the next section, Configuring NetWare Print Queues using NWAdmin.
Adding NetWare Print Queues Using NWAdmin (Queue Server Mode)
If you are using XAdmin32 with the Microsoft NetWare client, or you are using XAdmin, WebXAdmin, or JetAdmin 1.xx or 2.xx, you need to use NWAdmin to configure the actual NetWare print queue. This is because these utilities only allow you to define the print server context and tree (or file server, if you are using bindery mode). The following steps are required:
