by accessing the print server console through the print server serial port or via TELNET, DEC NCP, or XCD's XCONFIG utilities. Refer to Appendix A for information on how to use the serial port, TELNET, NCP, or XCONFIG to access the print server console.
Print Server Configuration Checklist
Before configuring the print server to receive PrintraNet print jobs, check the following:
1.Make sure that the E-mail server at the remote site (the receiving end) is configured to handle the TCP/IP POP3, and SMTP protocols (SMTP is only required if the notification feature is enabled).
2.Configure the POP3 server on the E-mail server at the remote site with a mail account and password for the remote printer (generally, the mail account name will be the first part of the name that you assigned in step 9 of the previous section; for example, if you assigned the name emailprinter@xyz.com, the account name would be emailprinter). The procedure for configuring a POP3 server varies depending on the operating system of the E- mail server, so consult your operating system documentation for details.
3.Make sure that the TROY XCD print server is installed and running with TCP/IP enabled and has a valid IP address assigned to it.
Because access to the E-mail server on most networks is usually restricted, you may need to have your network administrator check the configuration and add the mail account.
13-10 PrintraNet Internet Printing
