Printer icon and then execute the following steps when you get to the Add Printer Wizard.
1.Click on Next, Select Network Printer and click on Next again.
2.Select Browse, double click on the appropriate file server name, select the print queue, and click OK. If you used JetAdmin to configure the queue, you should double click on the HP_Network_Printers icon instead of the file server icon, and then select the TROY XCD print server name. Click on Next.
3.Select the desired printer manufacturer and model (click Have Disk if your printer is not listed), and click on Next.
4.If the driver already exists, select Keep Existing Driver (if it does not, this step will be skipped), and then click on Next.
5.If desired, change the name of the printer and/or make it the default, and then click on Next.
6.Select Yes when you are asked "Would you like to print a test page?" Click on Finish.
Configuring the Workstation (Windows NT 4.xx)
To add a queue from a Windows NT 4.xx workstation, execute the following steps: NetWare Windows VLM drivers and utilities installed. Then go to the Start button, choose Settings, and then select Printers. Double click on the Add Printer icon and then execute the following steps when you get to the Add Printer Wizard:
