extensively during the configuration process, so be sure to remember them. The names are as follows:
XConnect II |
|
XCD_xxxxxx_P1 | (parallel port) |
XCD_xxxxxx_S1 | (serial port, if enabled) |
XCD_xxxxxx_LN | (parallel port if LN03 option |
| is installed) |
XConnect II |
|
XCD_xxxxxx_P1 | (parallel port) |
XCD_xxxxxx_S1 | (serial port, if enabled) |
XCD_xxxxxx_LN | (parallel port if LN03 option |
| is installed) |
XConnect II Lite |
|
XCD_xxxxxx_P1 | (parallel port) |
XCD_xxxxxx_S1 | (serial port, if enabled) |
Pony Print Server Plus |
|
XCD_xxxxxx_P1 | (parallel port) |
The default NetWare print server names are actually the names of the print server's NetWare services (refer to Appendix B for more information on services). The "xxxxxx" in all of the above cases is the last six digits of the Ethernet address (for example, XCD_034578_P1). Refer to the label on the print server or to the print server
