6.Choose the desired printer under Installed Printers. If the desired printer does not exist, select Add>> and select the printer from the List of Printers, and click on Install (normally you will need either the original Windows diskette distribution or the printer manufacturer's driver diskette).
7.If the desired printer is not on the correct port, click on Connect, select the port, and click OK.
8.If desired, click Set as Default Printer to make the printer your default printer.
9.Exit the Print Manager.
Configuring the Workstation (DOS-based NetWare drivers)
To configure the PC workstation so that DOS applications can print transparently to the TROY XCD print server (you may also use this procedure if you do not have Windows- specific NetWare drivers), use the DOS editor to add a command with the following format to the AUTOEXEC.BAT file on your PC:
capture l=n q=queuename ti=timeout
where n is the number of the parallel port you wish to redirect, queuename is the name of the queue you created (if you using NetWare 4.xx in NDS mode, you may specify p=printername instead of the queue, where printername is the name of the NDS printer; be sure to enter the entire directory context of the printer), and timeout is a the number of seconds the file server will send data to the printer after the application last writes to a file (use at least 5 seconds for DOS applications and at least 50 seconds for Windows
