TROY Group MAN-EXT2000 manual PrintraNet Internet Printing

Using XAdmin, XAdmin32, or WebXAdmin to Configure the Print Server

NOTE: Skip this section if you wish to use the print server console to configure the print server.

Two graphical user configuration programs are included on the TROY XCD Print Server Software diskette or CD-ROM that is shipped with every TROY XCD print server. XAdmin runs on Windows 3.11 or Windows 95/98, while XAdmin32 runs on Windows 95/98 and Windows NT. To use XAdmin or XAdmin32, you must be running either NetWare or Banyan VINES client software, and the PC must be on the same network as the TROY XCD remote print server.

WebXAdmin allows the print server to be managed by any standard web browser using the TCP/IP protocol. Refer to Chapter 3 for additional information on XAdmin, XAdmin32, and WebXAdmin.

The steps required to configure the print server to receive print jobs from a Windows 95/98/NT PC running the PrintraNet software are as follows:

1.Select the name of the desired TROY XCD print server from the list by double clicking on it (XAdmin or XAdmin32) or entering its IP address (WebXAdmin).

4.Click on the Internet tab or button.

5.Enter the IP address of the POP3 server (consult your network administrator if you do not know this address).

6.Enter the mailbox name for the remote TROY XCD print

PrintraNet Internet Printing 13-11