3.Type in the IP address that you wish to assign to the print server in the Name or address of server providing lpd: box. If you do not have a router on the network, this IP address must match the first three bytes of the IP address of your computer. For example, if your computer has an IP address of 192.189.207.53, your print server must have an address like 192.189.207.27.
4.Type in the print server service name in the Name of printer of print queue on that server: box. If you do not know which service name to use, enter BINARY_P1 for the first parallel port, BINARY_S1 for the first serial port, BINARY_P2 for the XConnect 100 second parallel port, or BINARY_S2 for XConnect 100 second serial port and then click on OK:
5.Click on Close. The new print server IP address should be listed and highlighted as an available port. Click on Next.
6.Select the desired printer manufacturer and model (click Have Disk if your printer is not listed), and click on Next.
7.If the driver already exists, select Keep Existing Driver (if it does not, this step will be skipped), and then click on Next.
8.If desired, change the name of the printer and/or make it the default, and then click on Next.
9.If desired, make the printer shared (so other users can access it), and select the operating system(s) that these other computers will be running. Click on Next.
