command to expand the downloaded file. Then use the Run command again to execute the SETUP.EXE file in the destination directory that you selected (this file is generally in the DISK1 subdirectory) and begin the installation. Follow the instructions on the screen to complete the installation.
Important: Windows 98 requires either JetAdmin V2.54 (this version can be installed from the Microsoft Windows 98 CD by running the SETUP.EXE file in the
DRIVERS/PRINTERS/JETADMIN/DISK1/ directory) or V3.30 or later (available on the HP web site).
The TROY XCD print server will appear in the list of configured print servers unless IPX is not running on the computer and the print server is not configured with a valid IP address. If this is the case, then select Device from the menu bar and click on New. Select the desired print server from the list of unconfigured devices and then press Configure. Enter the requested information, including the IP address, subnet mask, and gateway. Then click Close to return to the list of configured print servers.
You may now select the print server from the list and click on the Modify button (or select Device and then Modify from the menu bar) to change the print server configuration.
HP Web JetAdmin
TROY XCD print servers work transparently with the HP Web JetAdmin utility for Windows NT Advanced Server. You can download this program at no charge from the HP web site (http://www.hp.com). Use the Windows NT Run command to expand the downloaded file. The files will
