•If you are configuring a bindery queue, click on the volume where the queue will reside (a volume name will have a file server icon next to it).
8.Click on New Queue.
•Enter any unique name for the Queue name. If you are configuring a bindery queue, click OK and proceed to step 8.
•If you are configuring an NDS queue, click Browse, select the file server volume where you want the queue to reside (a volume name will have a file server icon next to it), and click OK.
9.The queue name will now appear in the Available Print Queues under the selected volume (for bindery mode) or in the selected context (for NDS mode).
•Click on the desired queue.
•Click on Add>>
The name will now appear in the Serviced Print Queues window.
10.Click Close and then OK. You can now use the print queue from your NetWare workstation.
Configuring the Print Server and Print Queue with HP JetAdmin 3.XX (Queue Server Mode)
NOTE: JetAdmin 1.xx and 2.xx do not allow direct configuration of NetWare print queues. If you are using these versions, you may configure the print server with
