Intel MPCBL0001 manual Saving BIOS.bin to the SBC, Error Messages

Operating the Unit

10.3.2Saving BIOS.bin to the SBC

1.Copy the flashlnx utility and BIOS.bin to the SBC running MontaVista Carrier Grade Linux.

2.Execute “chmod +x flashlnx” to change the file attribute to executable form.

3.Execute “./flashlnx -b -zc BIOS.bin” to copy the BIOS.bin file to the FWH and CMOS.

4.Upon completion, perform a reset to ensure the new CMOS settings and BIOS are loaded.

Caution: To ensure that the BIOS.bin file is not corrupted, Intel strongly suggests performing these steps before major deployment of any SBCs running in a live network environment.

10.3.3Error Messages

The table below describes an error message that may occur while copying or saving the BIOS.

Table 89.	Error Message
	Message	Definition	Notes
	Data ID not found	CMOS area is not detected in BIOS.	Only applies to boards having this feature.

Intel NetStructure® MPCBL0001 High Performance Single Board Computer 133

Technical Product Specification