Intel MPCBL0001 manual Set Fibre Channel Port Selection, Get Fibre Channel Port Selection

Hardware Management Overview

3.7.2Set Fibre Channel Port Selection

This command sets the Fibre Channel port routing as specified in the request data bytes. The command is available over KCS and IPMB interface.

Table 14.	Set Fibre Channel Port Selection
		7	6	5	4	3	2	1		0
	NetFn/LUN		NetFn = 3Ah (OEM Request)						RsLUN
	Command				Cmd = 02h
	Byte 1	Intel IANA number (LSB) = 57h
	Byte 2	Intel IANA number = 01h
	Byte 3	Intel IANA number (MSB) = 00h
	Byte 4	Fibre Channel 1 setting, 0=disabled, 1=front panel, 2=Backplane, 3= Reserved, FF=
		Don’t change settings,
	Byte 5	Fibre Channel 2 setting, 0=disabled, 1=front panel, 2=Backplane, 3= Reserved, FF=
		Don’t change settings,
	Byte 1				Completion code
	Byte 2	Intel IANA number (LSB) = 57h
	Byte 3	Intel IANA number = 01h
	Byte 4	Intel IANA number (MSB) = 00h

3.7.3Get Fibre Channel Port Selection

This command returns the current Fibre Channel port ‘routing’ selection. The command is avail- able over the KCS and IPMB interfaces.

Table 15.	Get Fibre Channel Port Selection
		7	6	5	4	3	2	1	0
	NetFn/LUN		NetFn = 3Ah (OEM Request)					RsLUN
	Command				Cmd = 03h
	Byte 1	Intel IANA number (LSB) = 57h
	Byte 2	Intel IANA number = 01h
	Byte 3	Intel IANA number (MSB) = 00h
	Byte 1				Completion code
	Byte 2	Intel IANA number (LSB) = 57h
	Byte 3	Intel IANA number = 01h
	Byte 4	Intel IANA number (MSB) = 00h
	Byte 5	Fibre Channel 1 setting, 0=disabled, 1= Front panel, 2= Backplane, 3= reserved.
	Byte 6	Fibre Channel 2setting, 0=disabled, 1= Front panel, 2= Backplane, 3= reserved.

48	Intel NetStructure® MPCBL0001 High Performance Single Board Computer
	Technical Product Specification