Intel MPCBL0001 8.3.1 CPU Configuration Submenu

108 Intel NetStructure® MPCBL0001 High Performance Single Board Computer

Technical Product Specification

BIOS Setup

Tabl e 61 describes the Advanced menu. This menu sets advanced features that are available

through the chipset.

8.3.1 CPU Configuration Submenu

To access this submenu, select Advanced on the menu bar, then CPU Configuration.

Table 61. Advanced Menu

Feature Options Description

CPU Configuration Select to display

submenu

Display CPU details, Enable/Disable Hyper-Threading

Technology†.

IDE Configuration Select to display

submenu Display the primary IDE master and primary IDE slave drive.

SuperIO Configuration Select to display

submenu Set the serial port 1 & 21 address/interrupt.

ACPI Configuration Select to display

submenu

Enable/Disable ACPI support for OS, Enable/Disable

additional ACPI 2.0 tables.

System Management

Configuration

Select to display

submenu

Display FRU board and product information, Display BMC

device and FW information.

Event Logging

Configuration

Select to display

submenu Enable/Disable error logging.

Fibre Channel Routing

(PICMG)

Select to display

submenu Select Fibre Channel connections.

Remote Access

Configuration

Select to display

submenu

Set remote access type, select serial port1, set serial port

settings, Enable/Disable redirection after booting to DOS.

USB Configuration Select to display

submenu Enable/Disable USB devices.

PCI Configuration Select to display

submenu Enable/Disable onboard Fibre Channel option.

NOTE:

1. Only available under BIOS version P06-0019 and above.

Main Advanced Boot Security Exit

CPU Configuration

Manufacturer

Brand String

Frequency

HyperThreading

Contents

Main 2 Intel NetStructure MPCBL0001 High Performance Single Board Computer Contents Page Page Page Page Tables Page Figures Revision History Introduction 1 1.1 Document Organization 1.2 Glossary Page Features Overview 2 2.1 Application 2.2 Functional Description Intel NetStructure MPCBL0001 High Performance Single Board Computer 15 Features Overview Figure 1. Intel NetStructure MPCBL0001 SBC Block Diagram IPMC 2.2.1 Low Voltage Intel Xeon Processor CPU-0 (U35), CPU-1 (U36) 2.2.2 Chipset 2.2.2.1 Intel E7501 Memory Controller Hub (U22) Page 2.2.2.3 Intel 82870P2 64-bit PCI/PCI-X Controller Hub 2 (U14, U24) 2.2.3 Memory (J8, J9, J10, J11) 2.2.3.1 Memory Ordering Rule for the MCH 2.2.4 I/O 2.2.4.1 Super I/O (U28) Page Page 2.2.5 PMC Connector (J25, J26, J27) 2.2.6 Firmware Hub (U30, U33) 2.2.6.1 FWH 0 (Main BIOS) 2.2.6.2 FWH 1 (Backup/Recovery BIOS) 2.2.6.3 Flash ROM Backup Mechanism 2.2.7 Onboard Power Supplies 2.2.7.6 IPMB Standby Power Hardware Management Overview 3 3.1 Sensor Data Record (SDR) Hardware Management Overview Table 2. Hardware Sensors (Sheet 2 of 3) 3.2 System Event Log (SEL) Hardware Management Overview Table 3. SEL Events Supported by the MPCBL0001 SBC (Sheet 1 of 4) Table 3. SEL Events Supported by the MPCBL0001 SBC (Sheet 2 of 4) Hardware Management Overview Table 3. SEL Events Supported by the MPCBL0001 SBC (Sheet 3 of 4) 3.2.1 Temperature and Voltage Sensors Hardware Management Overview Table 4. Sensor Thresholds for IPMC Firmware 1.0 Table 5. Sensor Thresholds for IPMC Firmware 1.2 Hardware Management Overview Table 6. Sensor Thresholds for IPMC Firmware 1.7 and Above Table 7. Sensor Thresholds for IPMC Firmware 1.14 and Above 3.2.2 Processor Events 3.2.3 DIMM Memory Events 3.2.4 System Firmware Progress (POST Error) 3.2.5 Critical Interrupts Page 3.2.6 System ACPI Power State 3.2.7 IPMB Link Sensor 3.2.8 FRU Hot Swap 3.2.9 CPU Failure Detection 3.2.10 Port 80h POST Codes 3.3 Field Replaceable Unit (FRU) Information 3.4 E-Keying 3.5 IPMC Firmware Code 3.6 IPMC Firmware Upgrade Procedure 3.6.1 IPMC Firmware Upgrade Using KCS Interface 3.6.2 IPMC Firmware Upgrade via the IPMB Interface (RMCP) 3.6.2.1 Updating MPCBL0001 Firmware 3.7 OEM IPMI Commands 3.7.1 Reset BIOS Flash Type 3.7.2 Set Fibre Channel Port Selection 3.7.3 Get Fibre Channel Port Selection 3.7.4 Get HW Fibre Channel Port Selection 3.7.5 Set Control State 3.7.6 Get Control State 3.7.7 Get Port80 Data 3.8 Controls Identifier Table 3.9 Hot-Swap Process 3.9.1 Hot-Swap LED (DS10) 3.9.2 Ejector Mechanism 3.10 Interrupts and Error Reporting 3.10.1 Device Interrupts Figure 7. Interrupt Signals Table 22. Interrupt Assignments (Sheet 2 of 2) 3.10.2 Error Reporting 3.11 ACPI 3.11.1 System States and Power States 3.12 Reset Types 3.12.1 Reset Logic 3.12.2 Hard Reset Request 3.12.3 Soft Reset Request 3.12.4 Warm Boot 3.12.5 Cold Boot 3.12.6 Power Good Page Hardware Management Overview Figure 9. Reset Chain 3.13 Watchdog Timers (WDTs) 3.13.1 WDT #1 3.13.2 WDT #2 3.13.3 WDT #3 3.14 LED Status 3.14.1 Health LED 3.14.2 OOS (Out Of Service) LED 3.14.3 Hot-Swap LED 3.14.4 IDE Drive Activity LED 3.14.5 User Programmable LEDs 3.14.6 Network Link/Speed LEDs 3.14.7 Ethernet Controller Port State LEDs 3.14.8 Fibre Channel Port State LEDs 3.15 FRU Payload Control 3.15.1 Cold Reset 3.15.2 Warm Reset 3.15.3 Graceful Reboot 3.15.4 Diagnostic Interrupt Connectors 4 Connectors Figure 14. MPCBL0001NXX SBC Front Panel Figure 15. MPCBL0001FXX SBC Front Panel Connectors Table 37. LED Descriptions Table 38. Connector Assignments 4.1 Backplane Connectors 4.1.1 Power Distribution Connector (Zone 1) 4.1.2 Data Transport Connector (Zone 2) 4.1.3 Alignment Blocks 4.2 Front Panel Connectors 4.2.1 USB Connector (J12) 4.2.2 Serial Port Connector (J17) Figure 18. Serial Port Connector (J17) Table 42. Serial Port Connector (J17) Pin Assignments Page 4.2.3 Fibre Channel Small Form-Factor Pluggable (SFP) Receptacle (J34 and J35) 4.2.4 Fibre Channel SFP Optical Transceiver Module 4.2.5 PMC Connectors (J25, J26, J27) Table 45. PMC Connector Pin Assignments - 32 Bit Connectors Table 46. PMC Connector Pin Assignments - 64 Bit 4.3 On-board Connectors 4.3.1 IDE Connector (J24) Table 47. IDE Connector Pin Assignments Addressing 5 5.1 Configuration Registers 5.1.1 Configuration Address Register MCH CONFIG_ADDRESS 5.1.2 Configuration Data Register MCH CONFIG_ADDRESS 5.2 I/O Address Assignments Addressing 5.3 Memory Map Table 51. Memory Map 5.4 IPMC Addresses Specifications 6 6.1 Mechanical Specifications 6.1.1 Board Outline Specifications Figure 20. Intel NetStructure MPCBL0001 Component Layout Specifications Figure 21. Intel NetStructure MPCBL0001 Component Layout AB C DEF G 6.1.2 Backing Plate 6.1.3 Component Height Page Page Page Page 6.2 Environmental Specifications 6.3 Reliability Specifications 6.3.1 Mean Time Between Failure (MTBF) Specifications 6.3.2 Power Consumption 6.3.3 Cooling Requirements 6.4 Board Layer Specifications 6.5 Weight BIOS Features 7 7.1 Introduction 7.2 BIOS Flash Memory Organization 7.3 Complementary Metal-Oxide Semiconductor (CMOS) 7.3.1 Copying and Saving CMOS Settings 7.4 Redundant BIOS Functionality 7.5 System Management BIOS (SMBIOS) 7.6 Legacy USB Support 7.7 BIOS Updates 7.7.1 Language Support 7.8 Recovering BIOS Data 7.9 Boot Options 7.9.1 CD-ROM and Network Boot 7.9.2 Booting without Attached Devices 7.10 Fast Booting Systems 7.10.1 Quick Boot 7.11 BIOS Security Features BIOS Features 7.12 Remote Access Configuration Table 56. Supervisor and User Password Functions Table 57. Function Key Escape Code Equivalents BIOS Setup 8 8.1 Introduction 8.2 Main Menu 8.3 Advanced Menu 8.3.1 CPU Configuration Submenu To access this submenu, select Advanced on the menu bar, then CPU Configuration. Table 61. Advanced Menu BIOS Setup The submenu represented in the following table is used for configuring the CPU. 8.3.2 IDE Configuration Submenu Table63 shows IDE device configu rati on op tion s. To access this submenu, select Advanced on the menu bar, then IDE Configuration. Table 62. CPU Configuration Submenu Table 63. IDE Configuration Submenu (Sheet 1 of 2) 8.3.2.1 Primary IDE Master/Slave Submenu Table 63. IDE Configuration Submenu (Sheet 2 of 2) BIOS Setup Table 64. Primary IDE Master/Slave Submenu 8.3.3 Floppy Configuration Submenu To access this submenu, select Advanced on the menu bar, then Floppy Configuration. Tabl e 65 shows floppy device configuration options. Table 65. Floppy Configuration Submenu BIOS Setup 8.3.4 SuperIO Configuration Submenu Table66 shows SuperIO config uration options. To access this submenu, select Advanced on the menu bar, then SuperIO Configuration. Table 66. SuperIO Configuration Submenu 8.3.5 ACPI Configuration Submenu To access this submenu, select Advanced on the menu bar, then ACPI Configuration. Tabl e 67 shows ACPI configuration options. Table 67. ACPI Configuration Submenu BIOS Setup 8.3.5.1 Advanced ACPI Configuration Submenu Table68 shows AC PI confi guration options. To access this submenu, select Advanced on the menu bar, then ACPI Configuration. Table 68. Advanced ACPI Configuration Submenu 8.3.6 System Management Configuration Submenu To access this submenu, select Advanced on the menu bar, then System Management Configuration. Tabl e 69 shows System Management configuration options. Table 69. System Management Configuration Submenu BIOS Setup 8.3.7 Event Logging Configuration Submenu Table70 shows even t logg ing configuration options. To access this submenu, select Advanced on the menu bar, then Event Logging Configuration. Table 70. Event Logging Configuration Submenu 8.3.8 Fibre Channel Routing (PICMG) Configuration Submenu Tabl e 71 shows how to configure Fibre Channel routing options. Table 71. Fibre Channel Routing (PICMG) Submenu BIOS Setup 8.3.9 Remote Access Configuration Submenu Table72 shows remote access configuration options. To access this submenu, select Advanced on the menu bar, then Remote Access Configuration. Table 72. Remote Access Configuration Submenu 8.3.10 USB Configuration Submenu To access this submenu, select Advanced on the menu bar, then USB Configuration. USB configuration options. Table 73. USB Configuration Submenu BIOS Setup 8.3.11 PCI Configuration Table 74. USB Mass Storage Device Configuration 8.4 Boot Menu 8.4.1 Boot Settings Configuration Submenu BIOS Setup The menu represented in the following table is used to configure Boot Settings. 8.4.2 Boot Device Priority Submenu The menu represented in the following table is used to configure boot device priority. To access this submenu, select Boot on the menu bar, then Boot Device Priority. Table 77. Boot Settings Configuration Submenu 8.4.3 Hard Disk Drive Submenu To access this submenu, select Boot on the menu bar, then Hard Disk Drive Priority. To access this submenu, select Boot on the menu bar, then OS Load Timeout Timer. The menu represented in the following table is used to configure hard disk drive priority. 8.4.4 OS Load Timeout Timer 8.5 Security Menu To access this menu, select Exit from the menu bar at the top of the screen. 8.6 Exit Menu Table 81. Security Menu Page Error Messages Error Messages 9 9.1 BIOS Error Messages The following table lists the error messages. Table 83. BIOS Error Messages 9.2 Port 80h POST Codes Error Messages Table 85. POST Code Checkpoints (Sheet 1 of 2) Table 85. POST Code Checkpoints (Sheet 2 of 2) Error Messages The following table describes the beep codes implemented in the MPCBL0001 BIOS. Table 86. DIM Code Checkpoints Table 87. ACPI Runtime Checkpoints Table 88. BIOS Beep Codes Operating the Unit 10 10.1 BIOS Configuration 10.2 BIOS Image Updates 10.3 Procedures to Copy and Save BIOS (Including CMOS Settings) 10.3.1 Copying BIOS.bin from the SBC 10.3.2 Saving BIOS.bin to the SBC 10.3.3 Error Messages 10.4 Jumpers Operating the Unit Table 90. J18 Pin Assignments Table 91. J16 Jumper Assignments Table 92. J37 Jumper assignments 10.5 Digital Ground to Chassis Ground Connectivity Maintenance 11 11.1 Supervision 11.2 Diagnostics 11.2.1 In-Target Probe (ITP) Thermals 12 Component Technology Component Technology 13 Warranty Information 14 14.1 Intel NetStructure Compute Boards and Platform Products Limited Warranty 14.2 Returning a Defective Product (RMA) 14.3 For the Americas 14.3.1 For Europe, Middle East, and Africa (EMEA) 14.3.2 For Asia and Pacific (APAC) Page Customer Support 15 15.1 Customer Support 15.2 Technical Support and Return for Service Assistance 15.3 Sales Assistance 15.4 Product Code Summary Certifications 16 Agency InformationClass A 17 17.1 North America (FCC Class A) 17.2 Canada Industry Canada (ICES-003 Class A) (English and French-translated) 17.3 Safety Instructions (English and French-translated) 17.3.1 English 17.4 Taiwan Class A Warning Statement Page Agency InformationClass B 18 18.1 North America (FCC Class B) 18.2 Canada Industry Canada (ICES-003 Class B) (English and French-translated) 18.3 Safety Instructions (English and French-translated) 18.3.1 English 18.4 Japan VCCI Class B Page Safety Warnings 19 19.1 Mesures de Scurit Page 19.2 Sicherheitshinweise Page 19.3 Norme di Sicurezza Page 19.4 Instrucciones de Seguridad Page Page Reference Documents A Page List of Supported Commands (IPMI v1.5 and PICMG 3.0) List of Supported Commands (IPMI v1.5 and PICMG 3.0) B Table 97. IPMI 1.5 Supported Commands (Sheet 1 of 3) Table 97. IPMI 1.5 Supported Commands (Sheet 2 of 3) List of Supported Commands (IPMI v1.5 and PICMG 3.0) Table 97. IPMI 1.5 Supported Commands (Sheet 3 of 3) Table 98. PICMG 3.0 IPMI Supported Commands