Intel MPCBL0001 manual Remote Access Configuration Submenu, VT-UTF8

BIOS Setup

8.3.9Remote Access Configuration Submenu

To access this submenu, select Advanced on the menu bar, then Remote Access Configuration.

Main

Advanced

Boot Security Exit

CPU Configuration

IDE Configuration

Floppy Configuration

SuperIO Configuration

ACPI Configuration

System Management Configuration

Event Logging Configuration

Fibre Channel Routing (PICMG)

Remote Access Configuration

USB Configuration

PCI Configuration

Table 72 shows remote access configuration options.

Table 72.	Remote Access Configuration Submenu
	Feature	Options	Description
	Remote Access	Disabled	Select remote access type.
		Enabled
	Serial Port Number	COM1	Serial port for console redirection.
		COM22	Serial port for console redirection over LAN2
		115200 8, n,
	Serial Port Mode	57600 8, n,	Serial port settings.
		19200 8, n,
		9600 8, n, 1
		None
	Flow Control	Hardware	Select flow control for console redirection.
		Software
	Redirection After BIOS	Disabled
		Boot Loader	Select the redirection method after the POST boot loader.
	POST
		Always
		ANSI
	Terminal Type	VT 100	Select the target terminal type.
		VT-UTF8
	Send Carriage Return	Disabled	Enable this support if the target terminal has more than 80
		Enabled	columns.
	VT-UTF8 Combo Key	Disabled	Enable VT-UTF8 Combination Key support for ANSI/VT100
	Support	Enabled	terminals.

NOTES:

1.Bold text indicates default setting.

2.Only available under BIOS version P06-0019 and above.

Intel NetStructure® MPCBL0001 High Performance Single Board Computer 119

Technical Product Specification