Intel MPCBL0001 manual Environmental Specifications, Reliability Specifications

Specifications

6.2Environmental Specifications

The MPCBL0001 SBC meets the board-level specifications as specified in the Intel Environmental Standards Handbook – Telco Specification Document No. A78805-01. The test methodology is a combination of Intel and NEBs test requirements with the intent that the product will pass pure system-level NEBs testing. Intel will not be completing NEBs testing on the SBC. The following table summarizes environmental limits, both operating and nonoperating.

Table 53.	Environmental Specifications
	Parameter	Conditions	Detailed Specification
	Temperature	Operating (normal)	5 to 40° C
	(Ambient)
		Operating (short term)	-5 to 55° C
		Storage	-40 to 70° C
	Airflow	Operating	300 linear feet per minute (LFM) minimum
	Humidity	Operating	10-85% noncondensing
		Storage	10-95% noncondensing
	Unpackaged Vibration	Operating	5 Hz @ 0.01 g2/Hz to 20 Hz @ 0.02g2/Hz (slope up)
			20 Hz to 500 Hz @ 0.02 g2/Hz (flat)
			Input acceleration = 3.13 gRMS
		Storage	Not specified in current bluebook.
	Shock	Unpackaged	50 g

6.3Reliability Specifications

6.3.1Mean Time Between Failure (MTBF) Specifications

Calculation Type:	MTBF/FIT Rate
Standard:	Telcordia Standard SR-332 Issue 1
Methods:	Method I, Case I, Quality Level II

The calculation results were generated using the references and assumptions listed. This report and its associated calculations supersede all other released MTBF and Failure in Time (FIT) calculations of earlier report dates. The reported failure rates do not represent catastrophic failure. Catastrophic failure rates will vary based on application environment and features critical to the intended function.

Note: Incorporating an optional IDE Hard-disk Drive (HDD) will significantly impact the Reliability Specifications.

Table 54.	Reliability Estimate Data
	Failure Rate (FIT)	8,000	Failures in 109 hours
	MTBF	125,000	Hours

Intel NetStructure® MPCBL0001 High Performance Single Board Computer 97

Technical Product Specification