Intel MPCBL0001 manual I/O Address Assignments, Configuration Data Register Bit Assignments

Addressing
	CONFIG_DATA is a 32-bit read/write window into the PCI configuration space. The portion of
	configuration space that is referenced by CONFIG_DATA is determined by the contents of
	CONFIG_ADDRESS.
Table 49.	Configuration Data Register Bit Assignments
	Bit	Description
		Configuration Data Window (CDW): If bit 31 of CONFIG_ADDRESS is set to 1, any I/O access to
	31:0	the CONFIG_DATA register is mapped to configuration space pointed to by the contents of
		CONFIG_ADDRESS.

5.2I/O Address Assignments

I/O port addresses are divided among the on-board devices.These devices include:

•ICH3

•ISP2312 Fibre Channel controller

•82546 Ethernet controller

•SMSC LPC47B272 SIO

•MCH

•IPMC

Please refer to the respective device specifications for specific I/O address usage.

The MCH uses only I/O ports 0xCF8 and 0xCFC for PCI configuration cycle generation. These registers were shown in Section 5.1.1 and Section 5.1.2. The P64H2 forwards applicable I/O transactions to its attached PCI buses. The ISP2312 may be programmed to map its 256-byte bank of registers to memory and/or I/O space.

Table 50 lists document references to I/O descriptions. Please refer to Appendix A, “Reference Documents” for a list of the referenced documents and their complete titles, revisions, and document numbers.

Table 50.	I/O Address Cross-References
	Device	Document Title/Number	Section/Page/Table
	ICH3	ICH3 EDS	Section 7.3, Table A2 and A3
	MCH	E7501 MCH EDS	Section 4.3.5 and 4.3.6
	ISP2312	ISP2312 Design Guide	Section 6.6.9 and 6.7
	LPC47B272	LPC47B27x Datasheet	(Throughout datasheet)
	IPMC	Intel IPMC EDS	Section 4.3.7
	82546	Developer’s Manual, OR2941	Section 3.1.1.4

86	Intel NetStructure® MPCBL0001 High Performance Single Board Computer
	Technical Product Specification