Intel MPCBL0001 manual Front Panel Connectors, USB Connector J12, Serial Port Connector J17

Connectors

4.2Front Panel Connectors

4.2.1USB Connector (J12)

MOLEX part Number: 67329-0020

The MPCBL0001 SBC has one vertical USB connector that supports USB 1.1. USB connector JX is available at the front panel, as shown in Figure 13, “MPCBL0001 SBC Connector Locations” on page 70. The figure shows its position on the board. See Table 41, “USB Connector (J12) Pin Assignments” on page 77 for pinout information.

Table 41. USB Connector (J12) Pin Assignments

USB CONNECTOR

Pin # Signal Name

1+5 V

2-DATA

3+DATA

4GND

USB Connector (J12)

4.2.2Serial Port Connector (J17)

A single serial port interface is provided on the front edge of the card using an RJ-45 style shielded connector. See Figure 13, “MPCBL0001 SBC Connector Locations” on page 70 for its position on the board. The default connector is an 8-pin RJ-45.

MOLEX Part Number 43249-8919

Intel NetStructure® MPCBL0001 High Performance Single Board Computer 77

Technical Product Specification