Intel MPCBL0001 manual Interrupts and Error Reporting 10.1

Contents
3.4	E-Keying		44
3.5	IPMC Firmware Code		44
3.6	IPMC Firmware Upgrade Procedure		45
	3.6.1	IPMC Firmware Upgrade Using KCS Interface	45
	3.6.2 IPMC Firmware Upgrade via the IPMB Interface (RMCP)		46
		3.6.2.1 Updating MPCBL0001 Firmware	47
3.7	OEM IPMI Commands		47
	3.7.1	Reset BIOS Flash Type	47
	3.7.2 Set Fibre Channel Port Selection		48
	3.7.3	Get Fibre Channel Port Selection	48
	3.7.4	Get HW Fibre Channel Port Selection	49
	3.7.5	Set Control State	49
	3.7.6	Get Control State	50
	3.7.7	Get Port80 Data	50
3.8	Controls Identifier Table		50
3.9	Hot-Swap Process		51
	3.9.1	Hot-Swap LED (DS10)	52
	3.9.2	Ejector Mechanism	52
3.10 Interrupts and Error Reporting			53
	3.10.1	Device Interrupts	53
	3.10.2	Error Reporting	55
3.11	ACPI		56
	3.11.1	System States and Power States	56
3.12	Reset Types		56
	3.12.1	Reset Logic	57
	3.12.2	Hard Reset Request	57
	3.12.3	Soft Reset Request	57
	3.12.4	Warm Boot	58
	3.12.5	Cold Boot	59
	3.12.6	Power Good	59
3.13	Watchdog Timers (WDTs)		62
	3.13.1	WDT #1	62
	3.13.2	WDT #2	63
	3.13.3	WDT #3	63
3.14	LED Status		64
	3.14.1	Health LED	64
	3.14.2	OOS (Out Of Service) LED	64
	3.14.3	Hot-Swap LED	64
	3.14.4	IDE Drive Activity LED	65
	3.14.5	User Programmable LEDs	65
	3.14.6	Network Link/Speed LEDs	66
	3.14.7	Ethernet Controller Port State LEDs	66
	3.14.8	Fibre Channel Port State LEDs	67
3.15	FRU Payload Control		67
	3.15.1	Cold Reset	68
	3.15.2	Warm Reset	68
	3.15.3	Graceful Reboot	68
	3.15.4	Diagnostic Interrupt	69

4	Intel NetStructure® MPCBL0001 High Performance Single Board Computer
	Technical Product Specification