Actiontec electronic 11 Mbps Using the Wireless LAN Configuration Utility

Using the Wireless LANConfiguration Utility

☛Important:This Utility is for Wireless USB Adapter “B”(see step

4 on page 4).If using Wireless USB Adapter “A,”see page 11.

To monitor the wireless network to which the Wireless Adapter is connected,as well as

check or adjust wireless network settings,use the Wireless LAN Configuration Utility.

This Utility offers the ability to check wireless network signal strength,connect to a

wireless network using an encryption scheme,and many other options.

☞Note:The Utility is used only on computers running Windows

98,98 SE, Me, or 2000. If the computer being used runs

Windows XP,see “Windows XP”on page 28.

To open the Utility, go to the right-hand corner of the desktop. In the System Tray

(where the clock is located),right-click on the Actiontec Wireless LAN icon

(shown in the red circle,below)

A menu appears,as shown below.

There should be a black dot next to “Turn Wireless Radio On.”If not, click on the

text to activate the wireless radio.Then, select Advanced Configuration.