2.Installation
When an optional paper feed desk is connected to the machine, unpack and install the paper feed desk, then unpack the machine. Place the machine on the option desk securely, and perform the installing procedures of the machine.
Place the machine on the optional desk firmly and secure.
A. Developer installation
Be careful not to leave fingerprints or oily dirt on the DV roller sur- face.
1)Open the front cabinet. Slide the lock to release, and remove the waste toner box.
2)Turn the drum cover securing locks (2) to release, and then raise the drum positioning cover.
1 |
2 |
3)While pressing the lever, pull out the developing unit to remove.
4)Open the cover to remove.
5)Loading developer to the developing units.
Be sure to shake the bag of developer thoroughly before pour- ing into the developing unit.
When pouring the developer into the unit, use care to not get developer in to the drive section.
