G.Note for proper drum, developing, fusing and transfer unit handling
When handling the OPC drum, developing and transfer units, observe the following items.
Drum unit
•To prevent damage to the OPC drum, avoid working on the drum unit in high intensity light areas.
•When the OPC drum is removed from the machine, cover it with light blocking material. (When using paper, use about 10 sheets of paper to cover it.)
•Be careful not to attach fingerprints, oil, grease, or other foreign material on the OPC drum surface.
Transfer unit
•Be careful not to "leave” fingerprints, oil, grease, or other foreign material on the transfer roller, primary transfer belt and second- ary transfer belt.
Developing unit
•Be careful not to "leave” fingerprints, oil, grease, or other foreign material on the developing unit.
Fusing unit
•Be careful not to "leave” fingerprints, oil, grease, or other foreign material on the fusing roller and the external heating belt.
•Do not leave the fusing roller in contact state for a long time.
If these items are neglected, a trouble may be generated in the copy and print image quality.
2. Transit and delivery
No. | Content | Method |
1 | Implements, facility, | Use a forklift. (If no forklift is available, |
| and man power | manpower of two persons is required.) |
2 | Delivery | Transit must be made in packed condition. |
A. Implements, facility, and manpower
It is recommendable to use a forklift for bringing in the machine for safety.
If no forklift is available,
Transit of the machine must be made in packed condition to the installing place.
Since the hard disk drive is built in the machine, use care not to exert vibrations or shocks to the machine when in transit.
B. Delivery
Remove the packing materials prior to installation in the office envi- ronment.
3.Relationship between the model name and the designation in description of the document
Model name | Designation in description |
23cpm machine | |
26cpm machine | |
31cpm machine |