Sharp MX-2314N Image quality check, E. Specifications setup, A. Execution items, B. Description

E. Specifications setup

Use simulation 26-6 to set the machines destination.

SIM No		Content
26	6	Used to set the destination.

After completion of destination settings, change the set values to customize the following settings.

	SIM No		Content
26		3	Used to set the auditor specification mode.
		5	Used to set the count mode of the total counter and
			the maintenance counter.
		18	Used to set YES/NO of the toner save mode (Only
			in UK and Japan versions)
			* For other destination versions, this setup is
			made by the user program.
		52	Used to set YES/NO of counting when non-print
			paper is passed through each counter.
		53	Used to set YES/NO of user calibration permission.
		65	Used to set the limit number of sheets for stapling.

3.Image quality check

A. Execution items

Execute the following items.

No.	Item	SIM
1	Print engine image distortion adjustment (Manual	50-22
	adjustment) / OPC drum phase adjustment
	(Automatic adjustment) / Color registration
	adjustment (Automatic adjustment)
2	Copy color balance and density check
3	Printer color balance/density check	64-5/67-25
4 *1	Copy/Printer color balance and density adjustment	46-74
	(Automatic adjustment)

*1: When a printer option is installed, be sure to execute the above item.

B. Description

(1)Print engine image distortion adjustment (Manual adjustment) / OPC drum phase adjustment (Automatic adjustment) / Color registration adjustment (Automatic adjustment)

This adjustment performs the print engine image distortion adjust- ment, the OPC drum phase adjustment, and the color registration adjustment simultaneously.

1)Enter SIM50-22 mode.

ǂǂǂ ǂǂ

EXECUTE Adjustment completed

ǂǂǂ ǂǂ

Abnormal end

ǂǂǂ ǂǂ

MX-3114N MX-2314N/2614N/3114N (MAIN UNIT) 2 – 7