Sharp MX-2614N, MX-3114N, MX-2314N installation manual Press EXECUTE key

2)Press [EXECUTE] key.

[EXECUTE] key is highlighted and the image registration auto- matic adjustment is started. (It takes about 15 sec to complete the adjustment.)

3)When the adjustment is completed, [EXECUTE] key returns to the normal display, and the value of the adjustment result is displayed.

The current skew level for each color is displayed on the SKEW display section.

Display/			Content	Display	Default	NOTE
Item
MAIN F	C	Registration adjustment value main scanning		1.0 - 199.0	100
		direction (Cyan laser writing position F side)
	M	Registration adjustment value main scanning		1.0 - 199.0	100
		direction (Magenta laser writing position F side)
	Y	Registration adjustment value main scanning		1.0 - 199.0	100
		direction (Yellow laser writing position F side)
MAIN R	C	Registration adjustment value main scanning		1.0 - 199.0	100
		direction (Cyan laser writing position R side)
	M	Registration adjustment value main scanning		1.0 - 199.0	100
		direction (Magenta laser writing position R side)
	Y	Registration adjustment value main scanning		1.0 - 199.0	100
		direction (Yellow laser writing position R side)
SUB	C	Registration adjustment value sub scanning direction		1.0 - 199.0	100
		(Cyan drum	Black drum)
	M	Registration adjustment value sub scanning direction		1.0 - 199.0	100
		(Magenta drum	Black drum)
	Y	Registration adjustment value sub scanning direction		1.0 - 199.0	100
		(Yellow drum	Black drum)
SKEW	C	Print skew amount calculation result (Cyan)		-99.9 - 99.9	0	If the value is positive (+), "L" is displayed at the head of the
	M	Print skew amount calculation result (Magenta)		-99.9 - 99.9	0	value. If negative (–), "R" is displayed.
	Y	Print skew amount calculation result (Yellow)		-99.9 - 99.9	0	If the value is in the range of –2.1 - +2.1, "(OK)" is displayed at
						the bottom of the value. In the other cases, "(NG)" is displayed.
ALL_	Print skew amount calculation result (Overall)			-99.9 - 99.9	0	If the value is positive (+), "L" is displayed at the head of the
ROTATE						value. If negative (–), "R" is displayed.
						If the value is in the range of –1.6 - +1.6, "(OK)" is displayed at
						the bottom of the value. In the other cases, "(NG)" is displayed.
PHASE	OPC drum phase adjustment value			1 - 8	1

4)Write down the displayed skew level.

(Meaning of the skew level value and the adjustment proce- dure)

* If "OK" is displayed for all items of SKEW ALL_ROTATE, C, M, and Y, there is no need to perform the adjustment.

*When "R" is displayed at the head of the value, turn the LSU skew adjustment screw clockwise.

*When "L" is displayed at the head of the value, turn the LSU skew adjustment screw counterclockwise.

*The turning amount of the adjustment screw corresponds to each adjustment value. "ALL_ROTATE" indicates the num- ber of rotations, and C, M, and Y indicate numbers of clicks. The display value is rounded at the decimal point.

*"ALL_ROTATES" shows the number of rotations of adjust- ments for all the adjustment screws. "C, M, and Y(SKEW)" shows the number of adjustment click steps for each adjust- ment screw of C, M, and Y.

Contents in ( )

MIAN, SUB: Difference from the previous adjustment value of image registration.

Example:

If 105 for this time and 103 for the previous time, it is displayed as 105.0 (+2.0).

SKEW, ALL_ROTATE: Judgment of the LSU skew adjustment result. OK or NG.

PHASE: OPC drum phase adjustment value of the previous time

MX-3114N MX-2314N/2614N/3114N (MAIN UNIT) 2 – 8