10)When "COMPLETED THIS PROCEDURE" is displayed, the adjustment operation is completed.
Cancel SIM46-74.
ǂǂǂ ǂǂ
The adjustment result becomes valid only when the both adjustments in the copy mode and in the printer mode are completed.
For example, if the copy color balance adjustment (automatic adjustment) is performed and the simulation is canceled, the adjustment result is invalid.
11)Check the copy color balance and density.
(Refer to the item of the copy color balance and density check.)
When satisfactory color balance and density are not obtained from the automatic adjustment by selecting the factory target in procedure 4), change the factory color balance target with SIM
If a satisfactory result is not obtained with the above proce- dure, perform the manual color balance adjustment (ADJ 10C (2)).
Also when the service target is selected in procedure 4) to exe- cute the automatic adjustment and a satisfactory result is not obtained, perform the manual color balance adjustment (ADJ 10C (2)).
12)Check the printer color balance and density.
(Refer to the item of the printer color balance and density check.)
When satisfactory color balance and density are not obtained from the automatic adjustment by selecting the factory target in procedure 7), change the factory color balance target with SIM
If a satisfactory result on the color balance and the density is not obtained with the automatic adjustment, execute the man- ual adjustment (SIM
Also when the service target is selected in procedure 7) to exe- cute the automatic adjustment and a satisfactory result is not obtained, perform the manual color balance adjustment (ADJ 10E (2)).
If the color balance or density is not in the satisfactory level even after execution of the automatic and manual adjustments, there may be another cause.
Troubleshoot the cause, repair or perform necessary works, and repeat the adjustment from the beginning.
If color balance or density is not satisfied, adjust the copy and printer color balance by SIM
